검색하기

FAQ: imc 하드웨어

/

UPS 기능이 고장 났는지 어떻게 확인할 수 있습니까?

IMC측정장치를켜고정전을시뮬레이션있습니다.

만약UPS time5초로설정하고시간이후장비전원이꺼진경우, UPS정상동작하는것입니다. 그러나, 이전에장비가꺼진다면UPS 배터리는충전하는데시간이충분하지않았으며, UPS손상된것입니다.

 

장치를충전하기위해, ON 위치에 6 시간전원공급장치에연결하고정전을다시시뮬레이션수있습니다.

imc Online FAMOS에서, 5Hz보다 더 빠른 GPS 채널을 만들 수 있나요?

빠른GPS 채널을생성하려면, 샘플링속도로사용할적절한reference 채널을참조하여 "CreateVChannelInt"함수를사용합니다. 기능을사용하려면, imc Onlince FAMOS활성화장비가필요합니다.

imc Online FAMOS 창을열고아래와같은함수를입력합니다. :

VC_Satellites = CreateVChannelInt (Channel_001, pv.GPS.satellites)

VC_Longitude = CreateVChannelInt (Channel_001, pv.GPS.longitude)

VC_Latitude = CreateVChannelInt (Channel_001, pv.GPS.latitude)

VC_Speed = CreateVChannelInt (Channel_001, pv.GPS.speed)

The Channel_001 is the quick reference channel, thus providing the "time track" for the virtual channel "VC_Satellites". For each value the GPS Mouse delivers, there is a corresponding process vector variable.

 

“Channel_001” 채널은 reference 샘플링속도를가진채널입니다. "VC_Satellites" CreateVChannelInt 함수로생성된빠른 GPS 채널입니다. GPS에서제공하는각각의채널들을이와같이사용할있습니다.

Imc CRONOSflex ISO2-8에서 TEDS 정보를 왜 import할 수 없습니까?

 경우“preparation”없이해당모듈을 TEDS 지원할있습니다.

장비를켭니다. à S/W에서연결합니다. à모든채널을활성화합니다. à TEDS 정보를import합니다

제가 측정한 데이터가 불완전하게 종료가 되었습니다. 이것을 복구할 수 있나요?

UPS동작하지않는등의이유로, 장비가불완전하게종료되어데이터가완전하게저장되지않을있습니다.

불완전하게종료된데이터를복구하는방법은아래와같습니다. :

아래파일을다운로드합니다. :

http://www.imc-berlin.com/download-center/product-downloads/imc-devices/software/

 

그런다음, 불량파일이있는폴더에 Repair.exe dirrepair.bat 복사합니다. ( 파일백업필수! ) 그리고 dirrepair.bat실행합니다. 후에지금결함이있는데이터를확인있게됩니다. 하지만모든경우에작동하지않을있습니다. 이를예방하기위해서, PC장비에서동시에데이터를저장하여백업하는방법을추천합니다. 해당방법으로복수하지못하는경우, 본사로문의를부탁드립니다.

왜 Diskstart는 IMC CRONOS 플렉스 디지털 모듈에서 작동하지 않는 이유는 무엇입니까?

  imc software version as of 2014-03-19 이후에서만동작합니다.

 

 (ref. IT#19394)

왜 imc CRONOSflex ISO2-16-2T가 왜 측정이 되지 않습니까?

IMC CRONOSflex ISO2-16-2T다음과같은소프트웨어버전이지원됩니다 :

  • imc DEVICES 2.8 R3 SP9 (13.12.2013) + AddOn 04.02.2014
  • imc DEVICES 2.8 R5 SP1 (13.11.2013)   (ref. IT#19404)
What should I consider when using Li-Ion batteries?

 

Because of the unavoidable self-discharge of Li-Ion batteries (smart batteries), it  is recommended that the device be reconnected to a power supply no later than after 3 months of operation to fully charge the internal Li-Ion batteries.

  • The batteries recharge automatic when the device is connected to a power supply.
  • Charge time per Li-Ion battery: up to 3 hours
  • The storage of discharged smart batteries is not recommended and can possibly render them (the battery pack) unusable!
  • Capacity per Li-Ion battery:
    • 69 Wh (small, CRFX/HANDLE-LI-IO-L)
    • 95 Wh (large, CRC/B-Li-IO-1 and -2)



* pertains to imc CRONOScompact (CRC/B-Li-IO-1 und -2) and imc CRONOSflex (Power Handle: CRFX/HANDLE-LI-IO-L)

You can find the handbook and technical data in our Dowload-Center

Can my measurement device be retrofitted with a SSD hard disk?

SSD hard disk

Can my measurement device be retrofitted with a SSD hard disk?

Yes it can!

An internal 128 GB SSD hard disk (SATA) is available for imc CRONOSflex (CRFX-400,CRFX-2000) and for imc CRONOScompact.
An SSD hard disk offers the significant advantage over IDE disks by having improved vibration resistance.
An additional advantage over the IDE is also an increased temperature range. The IDE functions between 0°C to +50°C. The SSD hard disk is specified for a temperature range between 10°C to +70°C.

Notice: Not every comercially available SSD hard disk is compatible with imc devices. The SSD hard disks that we offer were specifically chosen and tested by us.


For additional questions, please contact your local imc partner, or contact us via the  Hotline.

What is there to consider about flash disks?

Flash disks: What is there to consider?

Which brand of flash disk do we recommend? What is there to consider?

In principle, any commercially available PCMCIA flash disk or CF memory card can be used. However, the cards on the market differ in writing/reading rates, timing and power consumption. In the "worst-case" this could lead to data loss.

Please take note of our white paper "How to use removable media".

Caution: We recommend using factory tested flash disks, since data overflow means loss of test data!

Top